Россия
+7 800 55 173 55
Оставить заявку
 
 

Заказ на LABOM CC6020-A1093-H1-T110-W4999-W2675 — 15.06.2021

LABOM CC6020-A1093-H1-T110-W4999-W2675 — Отправить заявку на info@famaga.ru

Состав заказа:

  • Производитель: LABOM
  • Страна: Германия
  • Артикульный номер: CC6020-A1093-H1-T110-W4999-W2675
  • Описание: Преобразователя давления DE1180-A4001-L23-T99-W4999 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation design: with temperature decoupler see data sheet D4-020-7 explosion protection: without pressure sensor piezoresistive for gauge pressure measuring range -1...24 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. output signal: 4...20 mA, 2-wire technology electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm ADDITIONAL DESIGN: see below Design for process temperatures up to 205 ° C - EAC-TR certification exemption statement - metrological certificate for the use in Russian Federation DIAPHRAGM SEAL for general application, screw-in thread see data sheet D5-032 per DIN 3852: G 1/2 A, PN 400 design: standard connection of meas. instrument directly welded material wetted parts: stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered DMB_787 temperature range: see below -20...+205°C
  • Дата последнего заказа: 15.06.2021
Менеджеры Famaga успешно приняли и отгрузили заказ на LABOM CC6020-A1093-H1-T110-W4999-W2675 от 15.06.2021 в Дублин. После отправки заявки заказчик получил от компании Фамага лучшую цену. Интересует такой же товар? После отправления заявки, наши менеджеры помогут Вам выбрать и купить нужный товар LABOM в кратчайшие сроки. Для запроса цен и сроков поставки, пожалуйста, заполните форму обратной связи или пришлите описание необходимых Вам наименований на электронный адрес info@famaga.ru
Оставьте заявку
Наш менеджер ответит на любой вопрос.
  • Напишите своё имя
  • Напишите телефон для связи
  • Напишите свой адрес электронной почты
  • ИНН необходим для выставления счетов
  • Неверный номер ИНН

Ежедневно обрабатываем более 200 заказов

Следите, какое оборудование заказывают наши клиенты прямо сейчас
Производитель
Состав заказа
CV3110-A1059-F80-H1100-M1-Y4-N51-T6-T31-K1085-W4020-W2002 DL9016-HY-E1-G1-A400-L22 Преобразователь давления CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 15,000 unit: bar H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without Y4 screw cap with window mat. Macrolon N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 1 switching module setting: at the factory, see below 1. switch contact: switch point: 8 bar breaker hysteresis:0,1% (falling) 2. switch contact: switch point: 10 bar breaker hysteresis:0,1% (falling) T6 case: hygienic design with screw cap material: stainless steel degree of protection: IP 66 incl, vent filter, stainless steel T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2002 CALIBRATION PROTOCOL: with 5 measuring points DL9 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology 016 design: APV flange design HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm E1 basic body material: stainless steel (316L) G1 diaphragm material: stainless steel (316L) A400 connection of meas. instrument directly welded L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C spare parts for fab.-no.: 1819962/10/003
Узнать цену

Прочие заказы LABOM

Наверх страницы
Перейти на мобильную версию сайта