Описание

  • 3-stage function
  • Stop command device
  • LED indicator
  • + and – buttons
  • Selector switches
  • Coiled connection cable, 5 m
  • Plug connector
3-stage functionEnabling function is active only in the second stage (middle position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence). Stop command deviceDual-channel emergency stop device (red, with pull-to-reset button) on the switch housing, for different wiring concepts. Lower position, protected by anti-kink cable gland in case of a fall. LED indicatorThe LED indicator is used for visual feedback directly at the enabling switch. + and – buttonsThese buttons can be cond individually. For example for moving axes in the positive or negative direction. Selector switchesAs required, the adjustable detent positions can, e.g. be used for axis, speed or range selection. CableThe high-quality connection cables are available in a coiled version. Dimension drawing Dimension drawing Wiring diagram Wiring diagram Wiring diagram Dimension drawingDimension drawingWiring diagramWiring diagramWiring diagram Technical dataApprovals Mechanical values and environment
Material PA, CR, TPE
Weight
Net 2 kg
Ambient temperature -5 ... 60 °C
Degree of protection IP54
Mechanical life 1 x 106
Switching principle Snap-action contact element
Number of changeover contacts 3
Connection Plug connector number of pins 17
Cable length
coiled 5 m
Electrical connection ratings
Rated conditional short-circuit current 100 A
Utilization category according to EN 60947-5-1
DC-13 24V 1A
24V 0.3A
24V 0.01A
Short circuit protection according to IEC 60269-1 2A gG
Rated insulation voltage Ui 250 V
Rated impulse withstand voltage Uimp 1,5 kV
Degree of contamination (external, according to EN 60947-1) 3
Connecting cable 23x0.14mm?
Switching characteristics 3-stage enabling switch
Other
Additional feature
Selector switch 3 positions 1
Pushbutton + 1
Pushbutton - 1
LED yellow 1
Emergency stop device 1
In compliance with 60947-5-8
Reliability values according to EN ISO 13849-1
Enabling switch
B10D 0,1 x 106
Emergency stop
B10D 0,1 x 106
''